VG1-5 | GunLab (KnownHost)

Just a quick update on the VG1-5 project 5-2-15

All the firing pins for the VG1-5, the Star pistol and the M1930 Sauer have been sent to heat treat. The buffer pins are there as well. The spot welder have been wired up and the coolant system will be finished this weekend. The first rifle was sent a while ago to Greg who took […]

views of VG1-5 rifles and slings

I have assembled a number of pictures of various VG1-5 rifles and there slings from the internet and ones that I have taken. These are the internet pictures.

A closer look at the sling.

This is the only picture that I have ever seen with a rear swivel on the sling.

Here is a […]

New tool for the wood shop

A while back a gent passed away and his wife was left with a cnc router. A friend of mine had loaned him the money for the router so the wife let him take the router as payement. Long story short he had no use for the router and a little trading went on and […]

Fluting machine up date

More work has been completed on the fluting machine.The tool holder and guide pin have been machined and installed.

A close up of the tool holder with the broaching tool installed.

The 3 jaw chuck has been machined for the barrel to fit into.

Next on the list is finish the hydraulics and […]

VG1-5 update

It has been a while since we have chatted about the VG1-5 so I thought an update was in order. All the individual parts have been made and the first non-firing copy was made. This last weekend we finished a testing example to try and determine if any problems exist. We looked at everything from […]

A quick Gun Lab update

I have to say that I am sorry about the lack of posts. In my defense I must say that my full time business and what actually supports me and Gun Lab has been hectic and very busy. It has been so busy that this is my first lunch break in two weeks. Starting my […]

Weekend Update 1-25-15

It is 6 P.M. on Sunday and I am done. Most of this weekend has been spent on the VG1-5 project. I finished all the small screws ,200, with the final op. Next will be Parkerizing.

The medium and larger screws are over 1/2 way completed.

All the fire control stamping ,110 of them, […]

Weekend update 1-19-15

Well it was another fun weekend around Gun Lab. This was the list I worked out during the week to be completed this weekend.

The 4″ conduit was run around the wood shop as well as the rest of the 2″ and 1″ and we buried it in preparation for the next phase.

[…]

VG1-5 magazine release button.

In this post we are going to show you how the magazine release button is made. We start with a laser cut washer.

Okay over 100 laser cut washers.

Then run them through the pressing tool that forms them to the shape we need.

After this step they look like this.

One hundred later […]

Making the VG1-5 strengthening plates

In this post we are going to take you through the steps necessary to make the strengthening plates for the side of the VG1-5 receiver. In the first couple of rifles that we made we bent the plates on my finger brake.

This was not a plan for doing over 200 of them. The time […]

Recent Posts

Categories