|
I was really hoping to have a video of it working with this post. That being said we are actually very close. All the hydraulic fitting and control circuits are completed. The digital read out in almost completed. Here is a quick video of our progress. Here is a close up of the mounting […] When the router table project came to a halt it was time to move on to something else. Back to the fab shop. You saw the work on the fluting press and the forging press. Well a little more work was accomplished on the fab shop addition. All the walls and door frames are up. […] In the last post you saw how we are coming along with the hydraulic forging press. Most of the work is now complete on it and I am trying to finish up the fluting press. Axel mad a lock nut for the tool holder. I have an DRO from the router machine that I took […] It is Sunday night and I am just about done. This is another post about the hot forging press. I did manage to get most of the piping put in place and made hangers for them. The hoses are hooked up. I just have a few more small items to complete and it will be […] Part of this last weekend was spent working on the hydraulic forging press and the fluting machine for the VG1-5. I started by threading all or at least most of the 3/4 high pressure hydraulic piping necessary. This is a video for the project. With the hard piping completed all the old hoses were […] Another weekend has come and gone. They always seem to go to fast and I never seem to get enough completed before Sunday night arrives. Getting closer to finishing the router table project and on the making the stocks for the VG1-5. I did manage to get the the router lifting table installed. Using […] Okay so there is only two days in the weekend and I am getting older and do not move as fast as I use to. So between the kitchen and the router table we also started on the fab shop addition. The concrete was poured a few weeks back and with the lack of room […] With the up coming SAR show my wife really wants the kitchen completed. So more time was spent on it this weekend as well. The sink and dishwasher are installed and working. The fake fronts in the stove cabinet are made and installed and looks good. In addition all the walls have been re-painted […] Another busy weekend here at Gun Lab. I did manage to get some time to work on the router table. The work that was accomplished was on the table top for the router table. The first thing was cut the slots for the biscuits. This was accomplished in both the table top and the oak […] While Axel worked on the pattern for the stock more was accomplished on the router table. All the drawers have been finished and the top has been glued together, marked out and the moulding cut and fitted. I would have finished the moulding up gut my disk sander gave it up. With no new […] |
||
|
Copyright © 2024 GunLab (KnownHost) - All Rights Reserved Powered by WordPress & Atahualpa |
||