|
The previous solid model that was printed showed some issues and missing features. I corrected the solid model and missing features. The push button assembly openings were added to the model as was the notch for the take down lever. I also corrected the the slot dimensions and shape. Radius were added to the thumb […] I have more changes to the lower receiver. To help study the internal fit up I have enlarged the hole of the cut away slot. I can actually see now that the trigger slot in the trigger guard needs to be longer and the trigger pivot pin needs to be dimensional changed and the stock […] With a slight break in modeling the receiver I decided to work on the metal that connects the stock to the frame. Between the pictures that are available and a stock for the Federal Ordnance carbine I was able to get a decent idea to allow for a solid model. The first print ,as always, […] With this photo you can see the progress on the V-9000 receiver. With each 3D print measurements have been corrected and the final product is getting closer. With the 9th and 10th 3D prints I am doing receivers with sections cut away to allow inspection of the internal part fit up. It allows me […] I have been working on this project off and on with some major improvements to the solid model. Between surgery, some physical ailments, a small vacation and work it has been slower then I like. I am currently at version 10 on the solid model and my 7th printing. This printing of the V-9000 is […] After I completed the first 3D print of the V9000 lower I notice some changes that needed to be accomplished. In fact I noticed a lot of changes that needed to be made to my solid model. some of the changes are inside dimensions and some are over all dimensions. In this case on the […] I completed the design of the cnc router dust collector boot if Fusion 360. I printed it on the Bambu P2S 3D printer. It took 14 hours to complete the print but it did come out very nice. it print has a great deal of support that will need to be removed. A quick […] The cnc router is finally almost finished. The discharge piping is in and going outside to the dust collector. all the adapters are made for the inside of the cabinet and the piping inside of the building. The dust collector boot has been modeled and is currently set up for the hose that I […] I have reverse engineered most the lower receiver in Fusion 360 and will print the first model this week. This is the first print so I can test my solid model. Using the Bambu P2S printer I will print a 3D model. There are a number of modifications that will needed to be made, but […] While doing research on the 1917 trench carbine I came across a rifle that I have never seen or even heard of. The V9000. There is a video on YouTube posted by LAI Publications. I just fell for this cute carbine. It also dissembles and the stock comes off. There was a print of it […] |
||
|
Copyright © 2026 GunLab (KnownHost) - All Rights Reserved Powered by WordPress & Atahualpa |
||