Categories

Update on the VG1-5 project

We have been working on the fire control group and once again have made a few changes for more reliable operation and safety. We continue to have issues with the disconnector operating properly. There were issues with the hammer spring improperly contacting the disconnector. An additional problem came about with insufficient spring pressure to hold […]

3D Printer

After seeing what Orin, a friend of gun lab, was able to accomplish with his printer I decided to take the plunge and obtain one for myself. I had previously look at this same model of printer a couple of years ago, however at 2500.00 it was out of my price range. At a cost […]

Hotchkiss feed strip ammo box

I happen to own a Hotchkiss portative light machine gun. Now that I have it working, with the help of my friend John, I find it one of the more fun guns to shoot.

So since last December I have been working on a couple of accessories for it. Well it happen that on […]

More on the VG1-5

You have now seen the first series of spot welds necessary to put the strengthening plats in and putting then together. With this accomplished it is time to do the first machining op on the receiver. This operation cuts out the trigger opening and also the holes necessary to weld in the front barrel support. […]

AR-180b upper receiver

Here At Gun Lab we actually have a number of projects going on. While we are waiting for our heat treating to come back for the VG1-5 and AR-180b parts we started on the AR-180B upper receiver. This receiver is design to fit on the Nodak-Spud lower as well as the AR-180B lower and the […]

Gun Lab update

This is an answer to a friends question about a particular project.

It is good to always keep checking with me. Things can get a little hectic around here. This is the status of the projects here.

1) the MP-44 trunnions test pieces have been completed and sent to the buyer. A […]

Weekend update and the fun of machining

Nothing really exciting to report. I spent the weekend machining large pieces of metal into smaller pieces. We have shipped the test MP-44 trunnions to Pete and while we are waiting for his report back we are filling our time working on making stamping dies. In this case all the pieces are sized and we […]

AR-180B trunnion design

An interesting question was brought up by Rick at http://ar180s.com/ a while back about making new AR-180B upper receivers. The actual receiver is not much of a problem however the trunnion is. The expense of making a new trunnion would be cost prohibitive so a different solution had to be found. In this case the […]

Reverse Engineering and machining the MP-44 trunnion

Here at Gun Lab we do a fair amount of reverse engineering, most of what we like to make have no drawings. However when there are drawings or solid models available we will use them. With this said I have found that most of what is available on the internet or in books is just […]

Making parts for the AR-180B

We were down to see our friend Rick at http://ar180s.com/ a while back and over the last few weeks during conversation he was interested in if we could make a few AR-180B parts. Why not that’s what we do. So while we are waiting for ATFE approval on the VG1-5 and the machines are kind […]