|
If you have an opportunity you should take a side trip over to Firearms History, Technology & Development. His site address is http://firearmshistory.blogspot.com/ this is great site. Generally he only posts a couple of times a month but when he does they are well thought out and very informative. It is well worth the trip […] I dropped by a friends house today between jobs and he had a pie of boy’s rifles that he was going through. The majority of them were single shot dropping blocks or rolling block rifles and I find those interesting, however there was one that had been gone over by someone to make what I […] I came across this series of videos by accident. The project is not complete yet, but it is turning into a very nice piece of art. Check it out. Part one of the series.
Part 2 of the series. Part 2b of the series.
Part 3 of the series […] This is the run down of the fun and excitement that went on this last weekend. We are testing out a new ejector design for the VG1-5. The original design that we used started to experience problems after several hundred rounds. The newer one will be a little more robust and a slightly better design. […] This is a quick update on the progress of the VG1-5 project. All the bolts back from heat treat All the hammers back from heat treat Magazine pressings for both the right and left sides of the magazine complete, next is to mill of the excess. Weld up the fire control box Spot welded the […] Last weekend and this weekend I spent a little time on the wire EDM that I picked up at auction. The last report I published we had changed out the bad switches on the control panel and had got the wire to feed through the machine. When I tried to start the water flow through […] There has been a number of articles and write ups on the Maxim gun lately so I thought I would add my 2 cents in. I have owned a number of Maxim guns over the years. An 08, 08/15 and a Chinese type 24 and well as a number of kits. However, my favorite Maxim […] In this post we will be covering some of the small parts as well as the assembly and dis-assembly and operation of the Volkspistolen. First a series of picture of this really nice looking pistol as completed. This first video is of assembly and dis-assembly of the slide […] In this report we will be writing about the frame and fire control part of the pistol. Again the pistol was made with out the use of an actual milling machine of lathe. It was made from hand tools, welders, and a drill press. Once again to get an idea of the final product here […] I have been reading this site for quite some time now. In fact it is one of the few sites that I actually print out and save hard copies of his projects. I find his write up’s to be well done and articulate. I just wish my photographs were as good as his. You should […] |
||
|
Copyright © 2026 GunLab (KnownHost) - All Rights Reserved Powered by WordPress & Atahualpa |
||