|
We are working on all the components for the barrel fluting machine. This is the Master Cam video for the making of the lower base. This part allows the chuck plate to move in and out. This allows us to load and unload the barrels from the chuck. This part has now been machined. […] This video is the first op on the back plate of the barrel fluting machine. In this video we are drilling and reaming the hole necessary to hold the plate to the table of the milling machine and align the plate for the next op. This will allow us to remove the exterior clamps and […] After a 14 hour work day my energy level is in the toilet. We have been working on the fluting machine so here are a few pictures of the parts as they currently stand. If I get home at a reasonable time tonight I will make a complete post on the parts […] The 1″ steel plate that we cut up last weekend has been cut down to size and then sized in the HAAS to actual specs. This is all that is that is remaining of the steel sheet that we started with. All of this material will be used on the fluting machine.This is what […] Well the fab shop new addition is now framed up and ready for a concrete pour. With any luck I will have the concrete completed in October. This weekend is also honey-do weekend as well. The tile needed to put down in the hallway and bathroom and the new lighting installed. This […] We have finished what I think is the last of the designing work on the chamber fluting press. Next week after the die is off the HAAS machine we will start machining the individual components. So here is the final design. We added a guide rod to insure that the tool head will […] More design work has been accomplish on the fluting press. Here are the latest updates on the project. This is the last major difficulty on the VG1-5 rifle. Most of the rest of the parts for the VG1-5 have been completed and have the fixtures for the bolt to upper receiver. I still have the […] Sorry for the late update. It has been a little busy and now with school starting again I found myself out of time. The major update for shop Tuesday is the design work that has been accomplished on the barrel fluting machine. I spent most of last Saturday morning and almost all of Monday working […] Most of Saturday morning was spent on another solid model. The actual projects that were accomplished were finishing the knurling tool and get back on the VG1-5 knurling project. So first on the list is the knurling tool. I have one that I bought form Shars. I just did not like it. It moved to […] To proceed with the building of the VG1-5 we needed to design and build a barrel chamber fluting machine. With the number of barrels that we need to make to complete the project I needed something that is accurate constantly, has repeatable, is semi automatic in operation and can be used for other rifle projects. […] |
||
|
Copyright © 2025 GunLab (KnownHost) - All Rights Reserved Powered by WordPress & Atahualpa |
||