If you have had the opportunity to read collector grade publication the last ditch rifles are brought up in there. This guest post write up is about the Ermawerke carbine in 7.92×33 kurtz.
Right and left side views of the rifle.
Close up of the left side of the receiver.
Bottom view of the […]
A friend of gun lab sent these series of pictures of an MP-44 under folder rifle. I don’t have much to say about it other then it looks very interesting and I would like to have one.
A couple of pictures of the rifle with the stock extended.
This is one with the stock […]
With the last post we made on the 7.92×33 FN-FAL we showed a FAL that had a new ejector block and magazine made to allow the rifle to shoot 7.92×33. This post will show a different approach to reach the same conclusion, shooting 7.92×33. This series of photographs comes from another friend of Gun Lab […]
In my list of want to do build projects building an original FAL is on the top. The very first FAL ever built was in 7.92×33 and was slightly different then the current FAL that we know today.
This rifle is missing and all that is left of it are the pictures you see […]
Op 7 has been completed. This is a major mill stone on making the MP-44 trunnions. The rest of the machining will be done on the manual mill. It will be easier on the manual mill then making the number of fixtures and tooling that would be required on the cnc machining center.
This is […]
I thought it was time for another cut away rifle that would be interesting. Most people never have the opportunity to see a STg45 much less the cut away version. Enjoy the pictures.
This is a picture of both the 06 and 06H (STG-45)
This is the first of […]
The next machining operation has been completed on the trunnion. This is one of the many unexpected problems with reverse engineering a component. The magazine did not fit. An error occurred that was missed. It is a good thing to check after every step which we do.
You can see the differences here and it […]
Not a big post for today, just an update on the projects we are working on.
First and most important is the VG1-5 project. I received a call this afternoon late that the firing pins can be picked up from the heat treating firm. With this last piece we can send the second rifle to […]
This is one of the rifles that we have been working on here at Gun Lab. I thought I would show you a few pictures of a cut away rifle of this model.
Here is a view from the left side that is not cut away.
This is a close up of the receiver […]
It has been a while since we have chatted about the VG1-5 so I thought an update was in order. All the individual parts have been made and the first non-firing copy was made. This last weekend we finished a testing example to try and determine if any problems exist. We looked at everything from […]