Categories

Weekend update 1-5-15

Well the new year is here and the holidays are over. It is time to get back into the routine of life. This last week was just that but a little longer. The first on the list was the honeydo’s  project. My wife wanted a new kitchen faucet for Christmas ,seeing how the old one had cracked and died, and I got the pleasure of installing it. Now before any of you get on my case about buying a faucet for my wife for Christmas and not something like jewelry, witch I make, or cloths, which I would never guess at, she bought it her self. In fact she buys all the gifts because I have no since of humor shopping. This is a picture of the old faucet and you can see why it needed to go.

DSC_3348sThis what she bought to replace it.

DSC_3307sNow the fun starts. There is nothing I like better then to get my old and over weight body down on the floor and try to squeeze into a small space and work.

DSC_3349s

DSC_3351sThen to only find out none of the hoses match up between the old faucet and the new on. So a trip to home depot to buy the necessary components and back on the floor again and we end up with this.

DSC_3352sWhile we are on the subject of honeydo’s my next door neighbor decided he needed a new tv. The large 63″ one in his bedroom just was not big enough so he bought a new one that was larger and was going to throw out his one year old one because it kept shutting down after 30 minutes or so. Because he had trouble moving it by himself he gave me a call and asked if I wanted it. Not one to turn down free stuff I said yes. It is now in the living room where it replace my 34″ set. And the timer has been reset so it operates great.

DSC_3354s

DSC_3355sIt took a while to get working and new cables have to be bought, as it is high def and our old one was not. I still can not get use to the size. It takes up the wall.

Now on to shop things. Most of this weekend was spent working in the wood shop and as the weather was a little chilly it was a good idea.

DSC_3316sYes, that is snow on the mountain behind my home.

Now, back to the wood shop. A couple of weeks ago I picked up some new, for me, wood working equipment. With the new additions I needed to make some changes to the shop. It seems a number of  people question my sanity for getting additional wood working equipment when I spend most of my time in the machine shop. There are two good reasons for this. The first is that I need to make stocks and metal casting patterns for some of the gun projects were we are doing. The second is that I started a complete house remodel a few years back and got stopped at the kitchen. I bought a kitchen store display cheap but when I went back to buy the additional cabinets to finish the kitchen the costs were out in the “O MY God” price range. The same is true when we contacted a number of cabinet makers in the valley. Not to mention that I am now sure that cabinet makers are one step below used car sales men in honesty and integrity. So I have decided to make the remainder of the kitchen cabinets because I have nothing to do in my spare time.

So,with the new tool I got for Christmas I got busy.

DSC_3312sI finished the back table for the table saw.

DSC_3375sA cabinet needs to be built for inside the stand. That project is coming up as soon as I finish the drawings in solid works.

DSC_3376sThen we move the radial arm saw to a new location to make it more user friendly and started build a larger table for it. This next series of pictures is that process.

DSC_3368s

DSC_3356s

DSC_3357s

We started with the old bench that I had in the shop, I got it out of a dumpster a while back and liked it. However it was to low for the saw and needed to be raised and there was a slight rise in the table so everything had to be hand fitted.

DSC_3363sBut by the end of the weekend we had it mostly finished. I need to pick up a 1.5″x2″x16′ long piece of steel to finish the job. This is how it looked when I stopped.

DSC_3374sThis weekend I also took a class for K. who is a professional photographer, and works for a top gun magazine, to try and improve my pictures. This is the photo I took at the beginning of the session.

DSC_3322s

DSC_3325sAnd these are the same shots at the end of the session. I was lucky enough to be able to spend a few hours with her and learned a great deal. With any luck I will be able to do it again.

DSC_3326s

DSC_3327s

DSC_3328sNo photoshop magic was done on any of them.

And as they say in the infomercials, BUT WAIT THERE’S MORE.

I also spent time in the machine shop working on the new parts we just got in fro the laser cutter for the VG1-5 project. I finished the magazine release button and the strengthening plates for the receiver.

DSC_3382s

DSC_3383s

DSC_3391sMagazine release buttons.

DSC_3394s

DSC_3397s

DSC_3400s

DSC_3404sA complete write up will be coming in the next few days along with videos. I also spent more time on the AR-16 drawings to try and get that rifle finished up in solid works. Other then taking my wife out to the movie and a few clean up projects this was my weekend. Tomorrow I will post an update on the VG1-5 project and all the other projects we have been working on here at Gun Lab.

 

 

 

4 comments to Weekend update 1-5-15

  • Pete F.

    AhHa! There’s your helper. He does not look to be doing much though.
    You sure get a lot done.
    Pete

  • Chuck

    He is the Consultant. That is someone that comes into your shop to tell you what time it is after looking at you clock. Sometimes he can even tell time correctly.

  • R

    Use the dust extractor attachment that came with your Kreg jig, it’s worth hooking it up to your shop vac. to avoid slowing your drilling down with sawdust that needs extracting.

    • Chuck

      Thank you. I am still not sure what all the components are for the jig. I will check it out this weekend when I finish the bench. Thanks again.

Leave a Reply

  

  

  


*

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>