|
Well this was a moving Saturday. I needed space in the fab shop and after looking at the deep hole drilling project for the last 10 years I figured it was time to move on. So with that being said it was time to move the big old lathe to the scrap yard. The first […] Last week was a really long week, most days leaving the house between 5:30 and 6:30am and not getting home until between 7 to 9 pm at night. Just shot. Saturday I went back to a guys shop that was selling some equipment off. I spent 3 hours or so there looking through boxes that […] This last week has been a huge push to finish the VG1-5 in time for the SAR show. A great deal of work needed to be completed and not near enough time to complete it all. The big push was to complete and correct the fire control mechanism. It is now fixed and operating properly. […] As always there is to much to do and not enough time to complete all of it. First is the update to the addition to the wood shop. The door is hung and the roof is up. The roof and sides are epoxy and fabric covered, for the most part. One more day and I […] It was a productive weekend as weekends go. The holes were drill into the side or the forging press I-beam to support the fluting machine. Here are a few pictures and a quick video of the process. Moving the back plate over was no big deal, once in the fab shop it was loaded on […] The 1″ steel plate that we cut up last weekend has been cut down to size and then sized in the HAAS to actual specs. This is all that is that is remaining of the steel sheet that we started with. All of this material will be used on the fluting machine.This is what […] |
||
|
Copyright © 2026 GunLab (KnownHost) - All Rights Reserved Powered by WordPress & Atahualpa |
||