|
Well another fun filled weekend has come and gone. A variety of projects were tackled and some minor accomplishment was achieved. The hole in the wood shop wall was filled in and sheet rocked over. Next weekend I will complete it and get it painted. I have started moving equipment around in the fab shop […] Not much work was accomplished as the time was spent at the SAR show. We had a little shoot on Wednesday prior to the show and then set up on Thursday. The shoot was fun,as to be expected, and the show went very well. The VG1-5 went over real well with about 30% of the […] Well as usual it has been a busy weekend around Gun Lab. More parts have been made for the VG1-5, coming soon in a post. The big project was the water system. The pressure pump took a crap. It just turn the pump room into a swamp and need to be fixed in a bad […] As always there is to much to do and not enough time to complete all of it. First is the update to the addition to the wood shop. The door is hung and the roof is up. The roof and sides are epoxy and fabric covered, for the most part. One more day and I […] It was a productive weekend as weekends go. The holes were drill into the side or the forging press I-beam to support the fluting machine. Here are a few pictures and a quick video of the process. Moving the back plate over was no big deal, once in the fab shop it was loaded on […] The 1″ steel plate that we cut up last weekend has been cut down to size and then sized in the HAAS to actual specs. This is all that is that is remaining of the steel sheet that we started with. All of this material will be used on the fluting machine.This is what […] Well the fab shop new addition is now framed up and ready for a concrete pour. With any luck I will have the concrete completed in October. This weekend is also honey-do weekend as well. The tile needed to put down in the hallway and bathroom and the new lighting installed. This […] Most of Saturday morning was spent on another solid model. The actual projects that were accomplished were finishing the knurling tool and get back on the VG1-5 knurling project. So first on the list is the knurling tool. I have one that I bought form Shars. I just did not like it. It moved to […] Another typical weekend here at Gun Lab. As with all weekends a certain amount of maintenance has to be completed. Saturday morning was spent doing some design work in solid works for a new piece of equipment that we are building to make fluted barrel chambers (more on that a little later in the week). […] |
||
|
Copyright © 2026 GunLab (KnownHost) - All Rights Reserved Powered by WordPress & Atahualpa |
||