I have finished the lower receiver for the Sudanese AR-10. I would now like to make some of the other parts for it and the Portuguese AR-10. I am really looking for Drawings and parts. If anyone could help it would be greatly appreciated.
|
I have finished the lower receiver for the Sudanese AR-10. I would now like to make some of the other parts for it and the Portuguese AR-10. I am really looking for Drawings and parts. If anyone could help it would be greatly appreciated. I posted the still pictures a little while back on making this part. Here is the lathe video on machining the first op. Just as a quick refresher on the part being made, this is the solid model of the part.
After the first op, which is the lathe op, […] We have been working on the rear sight for the FG-42 first model. The first picture that is a solid model of the entire sight assembly. The next picture is a picture of the component parts. The part we are currently working on is the base of the sight. So now that you have […] Most of my friends know that I am a little different. Generally when I call or e-mail them to let them know what is going on at gun lab there first comment is always why don’t you just work on one project until you complete it. There is a real good reason that I do […] With there not being any parts available we have to design and make every part. Some times this leads to re-doing a design several times. The firing pin is a case in point. The initial design was to use a H&K 91 firing pin that was turn down to fit the VG1-5. The reason for […] I had a small project that need an EDM to accomplish. So it was off to my neighbors house to use his home made EDM. I was making a new folding stock bolt for a L1A1 paratroop rifle that I wanted to make.
Some changes are being made to this edm based […] I know you are all hoping to hear about what happen in the shop today. How we got the Japanese type 99 stamping dies to work or the Fg-42 receivers are finished or that the last of the VG1-5 parts are completed. Well that is not the case. Today’s post is about what is not […] Once again time has gotten away from me. We are in the shop 7 days a week working on the projects and stuff actually gets accomplished. The updates this week will show the good and the bad that we have had in the last couple of weeks. First will be the really bad and that […] Today’s post is deal with machining the 1st die in a series of dies to make the FG-42 1st model butt stock. It will take a total of 8 stamping dies to make the complete butt stock. Enjoy the video. In the last post I showed you some of the parts that had been made for the 06, this time we will chat about the o5 and do a little more detail about the making of it. The life of the 05 starts out like any other pressing as a water jet cut flat. The […] |
||
|
Copyright © 2026 GunLab (KnownHost) - All Rights Reserved Powered by WordPress & Atahualpa |
||