Categories

Once again the weekend is over and I am still not finished

The third coat of epoxy was put down on the floor but not until I removed the epoxy from the joints and cleaned them and then filled them in, should have done this first.

DSC_9310s

DSC_9302s

We started to move the boxes of books to the the racks and get them off the rolling book cases.

DSC_9308s

DSC_9309sJust the start of the book moving fun

DSC_9311sThat is not even all the books from the rolling book case.

The stucco was removed from around the door and the old walk way.

DSC_9307sAll the way down the hall

DSC_9303sThen the plywood was removed to inspect the termite damage.

DSC_9325sOn both sides

DSC_9324sThe framing was completed and the door moved.

DSC_9326sStarted working on the outside protective coating prior to putting up the stucco again.

DSC_9313sJust ran out of time. It will be finished this next weekend.

DSC_9315sThe upstairs deck did get coated with a water proof coating

DSC_9317s

DSC_9316sPart of this complete transformation is to move the hardware store and convert that room and the well room as a wood shop addition.

All the iron fittings were removed

DSC_9188s

and moved to the electrical roomDSC_9196s

 

The old book case was the removed

DSC_9323sThe copper fittings were also moved to the electrical room.

DSC_9187sThere new home

DSC_9194sThe electrical room as it stands now.

DSC_9198sThis was my weekend, well that and working on the cnc router. Tomorrows post

 

2 comments to Once again the weekend is over and I am still not finished

Leave a Reply to Pete F. Cancel reply

  

  

  


*

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>