This was a weekend of building and equipment repair. The air system went out on the Sharps machining center. So out with the old and a completely new regulator, filter and oiler went on.
The switch went out on the grinder, new switch time. To attach it to the pedestal, the previous owner used bolts with square nut. He attached the grinder to the plate and then another set of bolts to hold the plate to the stand. With everything rusted it took a little longer then I would have liked. So a new switch, new wiring and re-drilled and taped the holes for cap screws.
Not exciting , but things that have to be done.
Liking that great cast iron grinder stand.
Pete
Chuck,
Will be out the last week of November. Want to visit your shop. What is the street address?
John Petrie