Comments on: Shop Tuesday September 9 http://gunlab.net/shop-tuesday-september-9/ Adventures in gun building! Thu, 02 Apr 2026 01:33:41 +0000 hourly 1 https://wordpress.org/?v=4.1.41 By: John Petrie http://gunlab.net/shop-tuesday-september-9/#comment-3832 Thu, 16 Oct 2014 18:19:56 +0000 http://gunlab.net/?p=1166#comment-3832 Chuck,

How close are you to finishing the VG1-5 project? When you get back on my project please remember to draw the front part of the bolt (the part that wears when the gun is fired) and the cams. Thanks.

John Petrie

]]> By: Chuck http://gunlab.net/shop-tuesday-september-9/#comment-2513 Wed, 10 Sep 2014 03:32:53 +0000 http://gunlab.net/?p=1166#comment-2513 Currently the plain is to broach the flutes. Every other method is not in the realm of my shops capability. Stay tune as we will be building the machine this coming week.

]]> By: Pete F. http://gunlab.net/shop-tuesday-september-9/#comment-2512 Wed, 10 Sep 2014 02:40:04 +0000 http://gunlab.net/?p=1166#comment-2512 So you are going to broach the flutes into the chamber?
Pete

]]> By: Chuck http://gunlab.net/shop-tuesday-september-9/#comment-2507 Tue, 09 Sep 2014 18:45:44 +0000 http://gunlab.net/?p=1166#comment-2507 The design to prevent the shaft from rotating is in the works. As for the gusset there is only a single post on the lower head. Still need to design the control circuits.Ns5T

]]> By: Mac http://gunlab.net/shop-tuesday-september-9/#comment-2505 Tue, 09 Sep 2014 14:57:54 +0000 http://gunlab.net/?p=1166#comment-2505 Two things, first is the hole for the hydraulic line at the head(bottom)of the cylinder. There should be 2 ports on that end. One can be pointed out at 90deg from the other end. No need to weaken the gusset with the extra hole for the hyd line.
Second is we still need to figure out a guild for the rod to prevent it from rotating as it comes down out of the cylinder. I have a couple of ideas to show you when I get there next week.

]]>