Categories

MP-44 Trunion op7 , 8 and 9

With these last three operations we will have completed the work on the cnc machining center.

 

DSC_8576sYou can see the process of rough machining the bottom of the curve for the trunion. This op also machined the complete magazine well out.

DSC_8577sA good side view of the rough machining of the curve.

DSC_8578sAll the trunions finished with this operation.

DSC_8582sThe basic set up to complete this op.

DSC_8583sDSC_8585s

This is op 8. All we are doing in this step is to finish cut the curve under the trunion.

DSC_8696s

OP 9 then goes in and cuts the top of the trunion.

These two pictures shows the top roughed out just prior to the finish pass.

 

DSC_8698s

DSC_8699s

 

This is how they look after the finish pass.

 

DSC_8688s

 

DSC_8687s

 

All the trunions after the finish of op 9

 

DSC_8697sA close up of the trunions.

DSC_8695sThe next step in the manual mill

6 comments to MP-44 Trunion op7 , 8 and 9

Leave a Reply to Chuck Cancel reply

  

  

  


*

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>